dB Technologies VIOS118 Caractéristiques Techniques page 57

English
• Slightly lift the line array to verify the correctness of
hooks and angles. If necessary, check with a laser
inclinometer (not provided) that the inclination of the fly-
bar corresponds to the one in the project. Check that all
the pins have been fully inserted and are locked.
• Remove the brakes from the DT-VIOL210 dolly, close it
and remove it.
• Lift the assembled line array with maximum care.
• Implement any other fastening technique necessary for
the safe and stable use of the line array, also considering
any atmospheric phenomena it may be exposed to.
!
WARNING
The product and accessories must be handled by experienced per-
sonnel only! Make sure that the installation is positioned in a stable
and safe manner in order to avoid hazardous conditions for people,
animals and/or objects. The user is required to follow regulations
and mandatory laws on safety of the country in which the product
is used. For safe use, regularly check the operation of all parts and
integrity before use.
Design, calculations, installation, testing and maintenance of sus-
pended systems or professional audio stacks must be performed by
authorized personnel only. AEB Industriale is not responsible for
improper installations, non-compliant with safety requirements.
WARNING
• Never use the handles, the brackets or other
elements of the speaker to directly suspend
the modules or the system!
• In case of outdoor use, it is recommended
to anchor the system to prevent any
oscillations due to wind or weather
conditions
VIO-S118
!
Cod. 420120259 REV. 1.0
57