Firmware Version; Technical Features - CAME BPT TH/600 Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

F
Note.
The temporary lack of power caused by a mains power outage or replacing the battery, does NOT lead
to any programming being deleted.

Technical Features

• Power supply: 230 Vac 50/60Hz.
• Consumption: 16mA.
• Autonomous life without power supply: about 10 hrs.
• Relay: max. voltage 250 V, max. current 5A with resistive load (2A with inductive load).
• Type of action: 1B-U.
• Available contacts: 1 NA-NC switch contact.
• Accuracy of internal probe: ≤ ±0.5 °C.
• Resolution temperature reading: 0.1°C.
• Accuracy of clock: maximum error ±1 sec/day
• Range of adjustment: from +3°C to +35°C.
• Protection rating: IP30.
• Operating temperature: from 0 °C to +40 °C.
• Maximum operating relative humidity: 93% (without condensation).
• Dimensions: 73x52x50 mm
• Room temperature measurement interval: 15 seconds.
• Electrical insulation: Class II, reinforced between accessible parts and terminals.
• Maximum control unit temperature: T40

Firmware version

The screen in figure F shows the number of the firm-
ware version installed on the device.
CAME S.p.A.
Via Martiri Della Libertà, 15
31030 Dosson di Casier - Treviso - Italy
tel. (+39) 0422 4940 - fax. (+39) 0422 4941

Publicité

Table des Matières
loading

Table des Matières