CAME BPT TH/600 Manuel D'installation Et D'utilisation page 43

Configuration of general parameters of the device
When the device is in Manual mode , holding down the
configuration screens.
Note. After accessing the configuration screen, press button
to be configured. To exit the configuration window, wait until the screen times out or scroll through all
the configuration windows.
A
B
C
D
button A gives access to the device's
to display in sequence the parameters
Enabling the screen lock
The factory settings do not provide any protection from
changes for the device B.
To leave this setting unchanged and move on to the next
parameter, press the
If you want to protect the device from unwanted changes
to programming, use the
screen lock C.
Press the button to access the window that lets
you set the code (password) that must be entered to
unlock the device.
The first number flashes D; use the
enter the first digit of the code, and the
move on to the next digit; pressing button
time means the code entered is considered valid and
you move on to the next parameter to be configured.
button.
arrows to activate the
arrows to
arrow to
at any