Geemarc CLEARSOUND AMPLICALL 16 Mode D'emploi page 7

Trouble shooting
Symptom
It makes sounds of
"Dingdong" or sounds
continuously without
remote operation.
When the power supply
works normally, the low
battery LED flashes
automatically.
When the batteries and
power adaptor connect
well, but it doesn't make
sound of "Dingdong"
during remote operation.
INSTALLATION
Solution
1) Check if the batteries
contact well.
2) Check if the power
adaptor connects
normally.
3) Turn off the power
switch for 10 minutes
and then turn it on.
1) Check if it is low
battery.
2) Turn off the power
switch for 10 minutes
and then turn it on.
1) Check if the battery is
too low.
2) Check if the battery of
the door bell is too low.
3) Turn off the power
switch for 10 minutes
and then turn it on.
6