Publicité
Les langues disponibles
Les langues disponibles
6. Blocking and compressing
Turn adjusting screw
Compress the
clockwise until the
doorcloser
end.
min. 50 mm
8. Provide mechanical stop in position OPEN,
otherwise:
Special applications:
Use on both
smaller than 65
sides, if:
Adjust the pressure,
only when absolutely necessary!
(not with inox)
O-ring
bearing bush
(not with inox)
Adjustment / Maintenance
V - "summer"
V + "winter"
according to season
Last check:
Mechanical stop in position OPEN? End with adjustment screw on door? Screws fixed? Moving parts greased? Customer instructed?
7. Fix the DIREKT and adjust the closing speed
Fix this end
always at the
pillar.
distance X
min. 460 mm
min. 480 mm
Door OPEN
wall
protective
glasses
WG slightly glued!
gloves
1 - 2 x per year
ø33
ø28
ø28
Bearing bush with
zinc-plated, white and black finish
pillar
SOFTLY 2-4 times,
then fix DIREKT
and
repeat, if necessary
grease
V -
ø33
V +
End with adjustment
screw always on door!
mechanical stop
Door OPEN
larger than 50
max. 100 grams
mixture of
oil and gas
refix
1 x per year
Direkt.Montage.Seite2.25.09.2008
Publicité
