ratiotec Soldi Smart Serie Mode D'emploi page 5

CURR | Setup switch
(currency and setup function)
Following functions can be activated or deactivated.
(only valid for the models Soldi Smart Plus | Pro | Pro USD):
Function Setting
HOLD ON or OFF
TONE ON or OFF
LED ON or OFF
ECO OFF | 15 | 30 | 45 | 60
BANKNOTE Arrows point to the front or
the rear
LANGUAGE English | Deutsch | Francais |
Italiano | Espanol
RESET Set to factory settings
You leave the menu by holding again CURR | Setup for 2 seconds.
EURO2 UPDATES
With our ratiotec update software you can easily conduct all EURO2 updates. However, the Soldi Smart
Series comes with various update-options – you choose the most convenient depending on your operating
conditions and infrastructure.
1. ratiotec Udpate Manager Start-up
Once installed, you benefit continuously!
You can install our ratiotec Update Manager on your PC and thus conduct all current and future EURO2
updates on your device. You only need to connect it to your PC using a standard USB to micro USB cable or
our update cable which is optionally available.
Our software is available for free download on www.ratio-tec.com. Further important information regard-
ing its implementation is provided.
2. ratiotec Update Start-up Set
Our optionally available update kit includes a miniSD card with the current ratiotec update software facili-
tating the implementation of all current EURO2 updates immediately on your device. There is no connection
to an external PC or internet access required!
Instructions on EURO2 updates via miniSD card for the Soldi Smart, Soldi Smart Plus, Soldi Smart Pro detec-
tors are provided on the following pages.
Press CURR | Setup once to select the currency. The chosen
currency is displayed. Hold CURR | Setup down for several sec-
onds to enter the set up menu. The message SETUP will appear
and for Soldi Smart Pro and Soldi Smart Pro USD the frame
lights up in blue color. To select the desired function, press
REP | ADD or CURR | Setup and save this by pressing ON |OFF.
Explanation
Banknote ejection with or without holding on to it.
Switch on or off acoustic signals.
Switch on or off the frame light function.
The device turns off automatically after a defined
period of time without use. (Ecomode)
Select the ejection of the detected banknotes, false or
suspect notes eject against the selected direction.
The currently used language appears.
Press ON | OFF for several seconds to set all functions
to factory settings. (Factory settings are highlighted
as bold above)
[EN]
5