Predialling - Philips ZENIO VOX 300 Mode D'emploi

Installing and replacing the batteries
The battery bars scroll when charging
according to the remaining charge : full
Battery life and range
The battery life is about 250 hours in stand by time (when the handset is in idle mode & ready
to receive a call) and around 16 hours in communication. A battery low alert will inform you that
the handset has to be recharged, if this is during a call, it will end shortly after the alert.
Optimal battery life is reached after 3 cycles of full charge/discharge.
Under ideal conditions, the range is up to 50 m indoors and 300 m outdoors.When reaching the
range limit, the conversation will become crackly, get closer to the base station otherwise you
will be cut off.To reach optimal range place the base station far from electrical appliances.
Understanding the menu system
To insert the battery pack, open the battery door on the handset
by sliding it down. Connect the battery pack to the connector
inside the handset. Place the battery with sticker face up and wires
along the left side of the battery pack.
When replacing the batteries, only use NiMh.
!
From idle screen, to access the carousel menu press
The carousel represents a loop of icons that gives access to the first
menu level. Scroll up or down
Press to validate and enter the menu.
The sub menus are listed and represented by little squares
bottom of the display.
To reach one particular sub menu scroll
A shows the sub-menu or option you are browsing. A
the selected sub-menu or option.
Note : Certain menus are directly accessible via a dedicated key on
the keypad (example the Call log
Direct dialling
1- Take the line
2- Dial on the keypad
The menu system
.When charged the icon changes
, 2/3 , 1/3
The batteries should not be disposed of with general household waste.

Predialling

1- Dial on the keyad
2- Take the line
and empty .
to reach the desired menu.
and validate your choice
)
at the
shows
3