Blumfeldt Rising Sun Zenith Mode D'emploi page 19

OPERATION VIA CONTROL PANEL
1 Connect the power line and the power strip.
2
Press Open/Close twice, the digital screen
3
shows P1 which means first power setting
Press Open/Close 3 times, the digital screen
4
shows P2 which means second power setting
Press Open/Close 4 times, the digital screen
5
shows P3 which means second power setting
After the function is on, 1-24 hours timing
shutdown can be adjusted. The digital screen
6
showing 01 indicates timing one hour, 02
indicates timing two hours, etc.
Click rocker switch to (I)
position and press Open/
Close once, the digital
screen shows P0 which
means power on.
EN
19