Publicité
Les langues disponibles
Les langues disponibles
GB
· Do not attempt to open the device or repair it yourself. In case of
malfunctions, contact only an authorized specialty store.
· Do not make any changes to the device.
Fuelling
Caution: Ensure that the flame has been completely
extinguished before filling with gas. The previously set
constant function must also be switched off by pushing
the continuous flame button (5) completely in the direction
of the flame nozzle ( 1). Otherwise, there is a risk that a
very small flame may not be extinguished and any
escaping gas may be ignited during filling. Burn danger!
· Use only high quality butane gas.
· Only fill the gas torch in well-ventilated rooms, far away from any
source of ignition such as open flames (e.g. candles, burning tobacco
products like cigars or cigarettes), pilot lights, electrical cooking devi-
ces, and away from other persons. Here, follow the safety instructions
on the gas refill bottle and the warning notes in the operating instructions.
· Shake gas container a few times to warm fuel up.
· Move flame adjustment slide (2) „-"position.
· Insert the container nozzle vertically down into the gas refill valve.
(8) pict
Caution:
is full. Please thoroughly clean the surface to remove any
spilled gas, so that it cannot ignite when lighting the
flame.
· Tip:
s an alternative, you can use the included adapter for easy
filling and refilling. Place the adapter vertically onto the nozzle of the
refill can. You can now fill the gas torch as described above.
· fter fuelling, allow a few minutes for gas to stabilise.
12
backflow of gas indicates that the gas cylinder
Publicité
