tomado TMA1201W Mode D'emploi page 20

INSTALLATION OF THE WINDOW SEAL SET
The flexible window seal set is suitable for many windows. Such as: tilt and turn windows, windows turning to the outside and inside. It ensures that you are able to hang the discharge hose
to the outside, without hot air flowing into the room again or having problems with insects.
For windows turning to the outside, we recommend taping all four sides (a+b+c+d) around the window and for windows turning to the inside only three sides (a+b+c).
• Attach the supplied Velcro tape on the window frame and the window in accordance with one of the drawings below that is similar to your situation.
• Then attach the cloth to the Velcro tape that you attached in the openings.
Fig. 1
Fig. 5
1. Attach the supplied Velcro tape on the window frame.
2. Then attach Velcro tape on the window.
3. Cut away excess Velcro tape.
4. Make sure the Velcro tape on the corners properly overlap to achieve proper sealing.
5. Attach the cloth to the velcro tape attached to the window frame and window.
6. Make sure the cloth is neatly attached to the Velcro tape on both sides.
7. Zip open the cloth.
8. Insert the discharge hose through the opening and zip the cloth closed to achieve proper sealing.
Fig. 2
Fig. 6
Fig. 3
Fig. 7
EN - 20
Fig. 4
Fig. 8