Introduction; Intended Use; Features; Package Contents - Parkside Performance PAKSP 20-Li A1 Traduction Des Instructions D'origine

CORDLESS CROSS CUT MITRE SAW
PAKSP 20-Li A1

Introduction

Congratulations on the purchase of your new appliance. You have chosen
a high-quality product. The operating instructions are a part of this product.
They contain important information about safety, usage and disposal.
Before using the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to
any future owner.

Intended use

This appliance is intended for cutting wood, wood-like products or plastics.
It may not be used for cutting ferrous materials such as rods, bars, screws,
etc.
Any other usage or modification of the appliance is deemed to be improper
and carries a significant risk of accidents.
The appliance should not be used for industrial purposes.

Features

On/Off switch
Handle
Motor unit
Spindle lock
Locking screw for the bevel angle
Locking screw for the table
Workpiece rest
Screw for the workpiece rest
Table
Display arrow on table
Mitre scale
Adjustable fence
Socket head screw
Blade guard
Release button
│ GB │ IE
■ 14
Figure A
Saw blade
Tensioning clamp
Setting screw for tensioning clamp
17a
Drill holes for workpiece rest
Drill holes
Mounting screw
Clamping flange (external)
Figure B
Handle
Dust extractor connection
Dust collection bag
Fastening clips
24a
Transport restraint
Clamping screw
Threaded rod
Figure C
Bevel scale
Bevel indicator
Figure D
Battery pack
Release button
Battery charger
Battery display LED
Battery charge level button
Red control LED
Green control LED
Hex key

Package contents

1 cordless cross cut mitre saw
1 high-speed battery charger
1 battery pack
1 tungsten carbide saw blade Ø 210 x 2.0 x Ø 30 mm 48Z
(pre-assembled)
2 tensioning clamps
1 dust collection bag
1 hex key
2 workpiece supports
1 set of operating instructions
PAKSP 20-Li A1