Call Up Measured Values; Conversion From Fahrenheit To Celsius Degrees And Vice Versa - uebe Domoterm Ear Mode D'emploi

B Operating the unit
9.

Call up measured values

This thermometer allows to store and call up the last 12 measured values.
To do so, please proceed as follows:
LCD display Meaning of the
indication
Memory call
Call 1
(the measured
value last iden-
tified)
Call 2
(the second last
measured value)
Call 12
(the oldest of 12
measured values)
When you press the start button again after 12 called up measured values and
release, the course of this sequence starts again, i.e. with measured value 1.
EN-40
ANL_DT_Ear_D-xaktuell_05_EN.indd40-41 40-41
Description
Press the start button for about
1 second, release button, the
symbol ««M» flashes.
Press the start button again
and release to call up the value
last measured. On the display
appears «1» jointly with the
memory symbol.
Press the start button repea-
tedly and release to call up the
second last measured value.
Press the start button and
release several times
consecutively to call up the last
12 values saved.
Operating the unit
10.

Conversion from Fahrenheit to Celsius degrees and vice versa

This thermometer can indicate the measured temperature either in Fahrenheit or in
Celsius degrees.
To convert the display from °C to °F, simply switch off the unit (O/I) and press the
start button for about 5 seconds until three lines and °C appear in the display.
By pressing the start button again, you can now switch between °C and °F.
After switching off the unit, the setting last selected remains active.
B
EN-41
06.08.2009 20:47:43