Initialization - Cristec Battery Monitor JBNUM-CPS3 Manuel D'utilisation

Reinitialization
For an accuration indication of the battery state, you must regularly achieve initialization of
Battery Monitor JBNUM-CPS3. This is possible when the battery is fully charged, and
when connected to the charger, charger in floating mode. The initialisation allows to
determine the full battery state (100%).
1 To do this, we must move on the
visualization of the battery you want to
initialize, and
_CONFIG_ and _RETURN_ for 1 second.
An Initialization confirmation screen will
2
appear (for 2 seconds).
The Initialisation is now completed.
3
For optimum operation, it is advisable to carry out an initialization at least 2 times a
year, even if your battery is fully charged.
www.busse-yachtshop.de | info@busse-yachtshop.de
press simultaneously
For a proper operating, an initialization is required:
- After the 1st operating once the battery is fully charged.
- After any interruption in power-supply of the Battery Monitor
JBNUM-CPS3.
- After replacing the battery.
Battery Monitor JBNUM-CPS3
39
Example : BATTERY 1