Cristec Battery Monitor JBNUM-CPS3 Manuel D'utilisation page 34

Battery Monitor JBNUM-CPS3
For operation and use
When the Battery Monitor is connected and powered, to activate it, press the
middle button.
VIEW_SIMULT
After having switched ON the Battery
Monitor, the visualization of the three
batteries is displayed simultaneously. We call
this window: VIEW_SIMULT
You can check data from each connected battery such as voltage, current and capacity.
VIEW_BAT1
From VUE_SIMULT, press _BAT1_, to
reach the status of the battery 1:
VIEW_BAT1
The provided information is voltage, current, capacity and temperature (only for batteries 1
and 2).
It is then possible to access to the configuration menu of the battery (press _CONFIG_ )
and the history (press _HISTORY_).
To return to previous view (VIEW_SIMULT), press _RETURN_ .
Note:
- The principle is similar to reach the state of batteries 2 and 3. From VIEW_SIMULT , press
_BAT2_ for battery 2 and _BAT3_ for battery 3.
- When the Battery Monitor remains inactive for 10 minutes, it turns into standby mode while
monitoring the batteries still connected. This is to reduce consumption. Simply press a
button and it returns to normal operation.
34
www.busse-yachtshop.de | info@busse-yachtshop.de