Siemens SIMATIC NET SCALANCE XM-400 Manuel De Configuration page 1244

Index
configure terminal, 99
coordinates height, 107
coordinates latitude, 108
coordinates longitude, 109
cos-map, 1055
D
das delete, 175
das discover interface, 171
das mac blink, 174
das mac ip, 173
das mac name, 172
dcp forwarding, 405
dcp server, 391
no dcp server, 392
default-information originate, 827
no default-information originate, 828
default-information originate always, 829
no default-information originate always, 830
delay-mechanism, 248
delete, 144
Dense Mode, 979
deny, 1099, 1110
deny icmp, 1113
deny tcp, 1117
deny udp, 1121
Designated forwarder, 979
Designated router, 979
disable, 100
distance (IPv4), 923
no distance, 924
distance (IPv6), 943
no distance, 944
distance (OSPF)
no distance, 818
distance (OSPFv2), 817
distance (OSPFv3), 885
no distance, 885
distribute prefix
no distribute prefix, 946
distribute prefix (IPv6),
distribute-list (OSPFv3), 888
distribute-list route-map, 839
no distribute-list route-map, 840
distribute-list route-map (IPv4), 924
no distribute-list route-map, 925
distribute-list route-map (IPv6), 947
no distribute-list route-map, 947
do, 73
domain name, 455
Domaine de validité, 35
1244
domain-id, 651
domain-name, 650, 652
dot1x fallback retry count, 1141
dot1x fallback timeout, 1141
dot1x guest-vlan, 1138, 1143
no dot1x guest-vlan, 1139, 1144
dot1x guest-vlan reset, 1146
dot1x guest-vlan vlan-id, 1145
no dot1x guest-vlan vlan-id, 1145
dot1x mac-auth, 1139, 1147
no dot1x mac-auth, 1148
dot1x mac-auth default-value, 1152
no dot1x mac-auth default-value, 1153
dot1x mac-auth mac-addr count, 1155
dot1x mac-auth port reset, 1149
dot1x mac-auth vlan-assign, 1150
no dot1x mac-auth vlan-assign, 1151
dot1x nas-id, 1142
dot1x port-control, 1153
no dot1x port-control, 1154
dot1x reauthentication, 1157
no dot1x reauthentication, 1157
dot1x timeout reauth-period, 1158
no dot1x timeout reauth-period, 1159
dot1x timeout tx-period, 1159
dscp-map, 1056
duplex, 119
no duplex, 120
E
enable, 101
ethernetip, 110
event config, 1182
no event config, 1185
events, 1178
exit, 72
F
factoryclean, 200
firmware-on-plug, 200
no firmware-on-plug, 201
flowcontrol, 1050
fmp, 1196
fmp power-loss, 1198
fmp rx-power, 1199
G
Glossaire, 37
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Manuel de configuration, 03/2021, C79000-G8977-C252-15