Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Thank you for your Polk purchase. If you have a question
or comment, please feel free to call or email us.
Technical Assistance
In North America, call Polk Customer Service at
800-377-POLK(7655) (M–F, 9 a.m.–5:30 p.m. EST)
Outside the US, call +1-410-358-3600
email polkcs@polkaudio.com
Polk Audio
1 Viper Way
Vista, CA 92081
Owner's manual is also available online at www.polkaudio.com
Placing Your Subwoofer in a Room
Your subwoofer offers many placement options: in an
entertainment center, behind furniture, or next to a sofa or
chair. You may place your subwoofer anywhere in the room,
but you'll enjoy the best performance when it's on the same
side of the room as your system's front speakers (Figure 1).
Placing your subwoofer near a wall or in a corner will increase
its loudness. When placing your subwoofer in the room, always
place your subwoofer on its base feet side down (Figure 2).
If you can at all avoid it, do not place your subwoofer next
to an open door.
FIGURE 1
TV

Subwoofer

FIGURE 2
FIGURA 1
TV
Subwoofer
We recommend placing your subwoofer in different
locations within your room to learn what produces the best
sound quality for your listening environment.
FIGURA 2
ITALIAN
Connecting Your Subwoofer
Receivers that include a "Sub Out" feature are the most
common connection method.
• Connect a single RCA cable from the "SUB OUT" of your
receiver to the LFE input of the subwoofer. This connecting
method bypasses the subwoofer's internal filter and relies
on the filter built into your receiver. Do not connect to the
Left or Right RCA jacks when using the LFE input. Do not
use speaker wire to make the connection to the subwoofer.
• Connect all speakers directly to the receiver. When using
this option, adjust your receiver's speaker configurations as
follows: Set Front, Center and Surround speakers to "small."
• Depending on your speakers' bass output capabilities, set
the crossover frequency on the receiver to 80Hz for tower
and bookshelf speakers (speakers with a woofer 5.25˝ in
diameter or larger) and 100-120Hz for satellite speakers
smaller than 5.25˝
Receiver Settings:
• Front, Center, and Surrounds = "SMALL"
• Subwoofer = "ON," or "YES," or "PRESENT"
See your receiver's owner's manual for speaker configuration.
FIGURE 1
Alternative Connection Option
Receivers with full-range (unfiltered) Left and Right
TÉLÉ
"Pre Out" jacks (this is the least commonly used connection).
Do not make any other connections to the subwoofer.
Haut-parleur
Do not use the LFE input when utilizing the Left and Right
d'extrêmes graves
RCA input jacks.
• Connect the left and right preamp output from your
receiver to the left and right LINE LEVEL input of the
subwoofer. Do not use speaker wires.
FRENCH
FIGURE 2
ABBILDUNG 1
TV
Subwoofer
GERMAN
ABBILDUNG 2
• When using this option, it is necessary to adjust the
settings on your receiver as follows:
Receiver Settings:
• Front speakers = LARGE
• Subwoofer = "OFF" or "NO"
User will need to set the subwoofer's crossover
in this configuration.
RECEIVER
SUB-OUT
USB port only for the software
upgrade service.
FIGURA 1
RICEVITORE
SUB-OUT
Subwoofer
POWER AMPLIFIER
INPUT
L R
图1
PRE-AMP
PRE-OUT
L R
重低音
Y CABLES
RCA
CABLES
FRENCH
AMPLIFICATORE DI POTENZA
INPUT (INGRESSO)
L R
PRE-AMP
PRE-OUT
SUBWOOFER
LFE
SUBWOOFER
TV
LFE
SPANISH
ITALIAN
FIGURA 2
SUBWOOFER
电视
L R
IN LINE
CHINESE
图2
SUBWOOFER
A
SPANI

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hts12

Table des Matières