pclocs Lockncharge EVO 40 Cart Manuel D'instructions page 4

EVO 40 Cart™
Section A - Setting up the Charge tray
(Note: for set-up of a Sync Charge tray, go to Section B - Setting up the Sync Charge tray).
STEP 1 - Installing the Charge Tray.
Insert the charging tray into the top compartment
of the Cart.
STEP 2 - Securing the tray.
Secure the tray with the quarter-turn fasteners.
STEP 3 - Attaching the device adaptors and cables.
Load all the devices into the baskets.
Insert the baskets into the tilting compartments.
Ensure the tray fits under the 'lip'.
Fasten the tray in 6 locations.
Attach each of the device chargers/ adaptors to
the sockets on the power boards (note: power
board may look different).