Getting Started; Charging The Battery; Turning On And Off; Inserting The Microsd Card - TOOLCRAFT Digimicro LAB 3.0 Mode D'emploi

9 Getting started

9.1 Charging the battery

Important:
Fully charge the battery before you use the microscope for the first time.
1. Connect the USB cable to the power adaptor.
2. On the microscope, connect the USB plug of the USB cable to the port DC/USB.
3. Connect the power adaptor to the mains supply to start charging.
The charging indicator light lights up.
Æ

9.2 Turning on and off

1. Flip the display open.
2. To turn on, press and hold the power button
3. To turn off, press the power button

9.3 Inserting the microSD card

1. (If turned on) Press the power button
NOTICE: Do not force card to prevent damage!
2. Insert a microSD card (class 10, min. 4 GB) into the microSD card slot. Gently
push in until the card latches.
32
until the display lights up.
.
to turn the microscope off.