Toxic Materials; Operation; Led Light; Connected Devices - TOOLCRAFT Digimicro LAB 3.0 Mode D'emploi

Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into fire. There is a danger of fire and explosion!
Charge the rechargeable battery regularly, even if you do are not using the prod-
uct. Due to the rechargeable battery technology being used, you do not need to
discharge the rechargeable battery first.
Never charge the rechargeable battery of the product unattended.
When charging, place the product on a surface that is not heat-sensitive. It is
normal that a certain amount of heat is generated during charging.

7.6 Toxic materials

The clear plastic distance shell can pick up dirt or toxic material from an ob-
served surface. Only use protective gloves to touch.

7.7 Operation

Consult an expert when in doubt about the operation, safety or connection of
the appliance.
If it is no longer possible to operate the product safely, take it out of operation
and protect it from any accidental use. DO NOT attempt to repair the product
yourself. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.

7.8 LED light

Attention, LED light:
Do not look directly into the LED light!
Do not look into the beam directly or with optical instruments!

7.9 Connected devices

Also observe the safety and operating instructions of any other devices which
are connected to the product.
29