Electrical Diagram; Electrical Requirements - Dynamic FT 97 Notice D'utilisation Et D'entretien

⑨

ELECTRICAL DIAGRAM

FILTER / C-E-M
Variator
MOTOR

ELECTRICAL REQUIREMENTS:

The mixer of a class 2 category (double insulation) is powered by a single phase alternating
current and does not require a "u" ground plug.
A differential circuit breaker and one (1) 10A fuse is required.
You must provide a 10/16A single phase current socket.
Always verify that your power supply corresponds whatis indicated
on the plate on the motor unit and that it can take the amperage.
15