Publicité
TECHNICAL DESCrIPTION
Carrier
Drive / Steering
Frame
Outriggers
Engine
Transmission
Axles
Suspension
Wheels and tyres
Steering
Brakes
Electrical equipment
2-man driver's cab
Outrigger basis monitoring
(only for EU delivery)
Superstructure
Hydraulic system
Hoist
Slew unit
Boom elevation
Crane cab
Main boom
Counterweight
Operator aids
Stowage facility
Optional equipment
Additional counterweight
Main boom extension
Hoist II
Rooster sheave
Hook blocks
Tyres
Electrical brake retarder
Bi-carburation system
Air-conditioning for upper cab
Limitation of working radius
Further options available on request!
27
4 x 4 x 4.
Monobox main frame with integral outrigger boxes fabricated from high-strength fine grain structural steel.
4 fully hydraulic telescopic outrigger beams and jacks. Electronic levelling indicators.
Water-cooled 6 cylinder MTU engine OM 906 LA, rating 205 kW (279 HP) at 2200
at 1200-1600
1
/min, certified in compliance with EURO MOT 3a, Tier 3 and CARB;
Water-cooled 6 cylinder MTU engine OM 936 LA, rating 210 kW (286 HP) at 2200
1
at 1200-1600
/min, certified in compliance with EURO MOT 4, Tier 4F and CARB; 40 l Ad blue tank.
Engine selection depending on local regulations.
Fuel tank capacity: 250 l. Integrated spark catcher.
Automated powershift transmission with torque converter and integral transfer case, 6 forward and 2 reverse
speeds, longitudinal differential lock-out control.
Axles 1 and 2: planetary hub reduction, steering, with transverse differential lock-out control.
Hydropneumatic suspension, axles 1 and 2 hydraulically lockable. Automatic or manual levelling.
4 wheels fitted with 14.00 R 25 tyres, single wheels on all axles.
Dual-circuit hydraulic steering complying with EC directives. Crab steering on job site.
Service brake: dual-line air system acting on all wheels, ABS. Parking brake: spring-loaded type on both axles.
Sustained action brake: exhaust brake and constant choke valve.
24 V system.
Rubber-mounted all-steel cab, corrosion-resistant coating, tinted windows, driver's seat and 2nd man's seat,
full instrumentation and travel controls, rotary beacons, folding step. Electrically adjustable and heated outside
mirrors. Air-conditioning. Power door windows.
Surveillance of each outrigger beam for visual comparison with the programmed outrigger basis.
Displayed in the superstructure cabin LMI.
Warning: No automatic linkage with LMI system.
Powered by carrier engine, 1 variable displacement axial piston pump and separate fixed displacement pump
permitting 4 independent movements to be performed simultaneously, hydraulic oil cooler.
Hydraulic tank capacity: 300 l.
Fixed displacement axial piston hydraulic motor, hoist drum with integrated planetary gear reducer, and spring-
applied multi-disk brake.
Hydraulic motor with planetary gear reducer, pedal-operated brake, spring-applied holding brake.
1 differential cylinder with automatic lowering brake valve.
Comfortable all-steel cab with sliding door, hinged windscreen, tinted windows, corrosion-resistant coating,
hot air heater. Dashboard with instrumentation and crane controls. Working light.
30.4 m. Basic section and 3 telescoping elements made of high-strength fine grain structural steel.
1 double-acting cylinder for 2 sections and simultaneous extension with synchronization of 4th element by
means of cables; or:
37.4 m. Boom base and 4 telescopic sections fabricated from high-strength fine grain structural steel.
1 double-acting cylinder for 2 sections for sequential telescoping with synchronization of sections 4 and 5
by means of cables.
2 t, 3 t, 3.6 t (depending on local road regulations).
Electronic load moment indicator, hoist limit switch, pressure relief and safety holding valves.
On side and rear.
Up to maximum 5.5 t. Includes storage, lifting and hydraulic locking system.
Side folding 2-part jib, 8 m or 15 m, offsettable at 0°, 20°, 40° for 4 section boom.
Side folding 1-part jib, 8 m, offsettable at 0°, 20°, 40° for 5 sections boom.
Fixed-displacement axial piston motor with integrated planetary reducer.
Side folding boom head sheave for single-line operation.
15 t, 22.5 t, 25 t, 32 t, 40 t and single line hook 5 t.
16.00 R 25, 20.5 R 25.
Tank capacity 120 l.
1
/min, max. torque 1100 Nm
1
/min, max. torque 1150 Nm
Publicité
