CHIEF iC Serie Instructions D'installation page 14

iCMPDA2
3A
(C)
(BB) x 4
2
14
(N) x 4
1
(M) x 2
(M) x 2
3
(CC) x 4
6
(E) x 2
Attaching Center Bracket
1. Attach center bracket (C) to vertical mounting brackets (E)
using four M4 x 12mm Phillips head screws (N) and four
#10 flat washers (BB).
2. Attach iCMPDA2 to bracket using two M4 x 8mm Phillips
head cap screws (M) in the upper two mounting holes.
3. Complete attachment of iCMPDA2 using two M4 x 8mm
Phillips head cap screws (M) in the lower two mounting
holes.
4. Proceed to Step 3B.
Installation Instructions
(BB) x 4
[Only used
with screws
N or P]
(N through AA) x 4