Add/Remove Water Outlets From Cycling Pattern (For Massage Functions); Cycling Speed (For Massage Functions) - Jacob Delafon DTV E684-1CP Notice Technique

Add/Remove Water Outlets from Cycling Pattern (For Massage Functions)

Path: Settings > Not Cycling
This function sets the water outlets that will not cycle when the massage functions are
activated. Only water outlets designated as body sprays or watertiles will be allowed to cycle,
all other outlets will be checked as not cycling.
NOTE: Checking outlets that are designated to cycle will limit your massage functions.
• Scroll to and select "Not Cycling" from the settings menu.
• Use the dial to scroll through the water outlets. Press the [OK Icon] to check the water
outlets that you do not want to cycle.
• When a checked water outlet is highlighted, pressing the [OK Icon] will uncheck the water
outlet and enable that water outlet to cycle.

Cycling Speed (For Massage Functions)

Path: Settings > Speed > Slow or Fast
This setting adjusts the cycling speed of the water outlets during the massage functions. The
default setting is "Slow."
• Scroll to and select "Speed" from the settings menu.
• Use the dial to choose either "Slow" or "Fast."
• Press the [OK Icon] to set the cycling speed.
80 English