Jacob Delafon DTV E684-1CP Notice Technique page 72

Set user preferences (cont.)
Set tempe rature
• Use the dial to set your desired temperature, press the [OK Icon].
Choose Water Outlets
NOTE : Checked items are on, and unchecked items are off.
• Use the dial to highlight the desired water outlet, press the [OK Icon] to turn the highlighted
outlet on or off.
• Repeat for remaining outlets as desired.
Set Massage Options
NOTE : Available water outlets listed will vary dependent on your chosen configuration.
• Scroll to a water outlet such as "Showerhead," press the [OK Icon] to turn the outlet on or
off. Any checked items will be on.
• Once all desired water outlets are turned on, scroll to "Massage" and press the [OK Icon]
to select. If the [No Icon] is present and you are unable to select "Massage" refer to the
"Activate the Massage Functions" section.
• Scroll to and select your desired massage cycling pattern. For more detail about the cycling
patterns refer to the section for your particular shower configuration: "Frontage," "Envelop,"
"Unwind," "Linear," "Downpour," "Surround," or "Custom."
• Press the [Back Icon] to return to the options menu.
Set Cycling Speed
• To change the speed of the massage cycling, scroll to and select "Speed."
• Use the dial to select either "Slow" or "Fast" by pressing the [OK Icon].
• Press the [Back Icon] to return to the options menu.
Set Hot Therapy Options
NOTE : Only one temperature therapy can be saved per user at one time. You can save
either a Hot Therapy or a Cold Therapy.
• To customize the hot temperature therapy settings, scroll to and select "°F Therapy." If
the [No Icon] is present and you are unable to select "°F Therapy" refer to the "Activate
Temperature Therapy" section.
• Scroll to and select "Begin Hot." You will see a temperature screen with the various
temperature jumps along the bottom.
72 English