Custom Configuration - Jacob Delafon DTV E684-1CP Notice Technique

Custom configuration

Water Outlet Configuration
1: Outlet 1 (Primary Showerhead)
2: Outlet 2
3: Outlet 3
4: Outlet 4
5: Outlet 5
6: Outlet 6
Massage Cycling Patterns
Single
NOTE : Primary outlets and any outlets designated
as handshowers will not be included in the cycling
pattern. For installations that include both body
sprays and watertiles, the outlets designated as
watertiles will not cycle.
General Guidelines for Custom Configurations:
• Outlet 1 is always recommended to be the primary showerhead. Custom mode will allow the
user to select a different port as the primary, but it is not recommended.
• When cycling during massage functions, the body sprays/watertiles will cycle from Outlet 1
to Outlet 6, regardless of which port is designated as the primary outlet.
• The installer must determine the water outlet cycling order for the "Single" massage function
and plumb each water outlet accordingly.
• Use the above diagrams to draw in the components for your custom shower.
• Draw lines from the valve to each component as your shower is plumbed.
NOTE : Only water outlets designated as body sprays or watertiles will be allowed to cycle.
Any outlets with 2 fittings, such as 2 Body Sprays or 2 WaterTiles will not cycle. Also any
instance where watertiles and body sprays are used in the same configuration, only the body
sprays will cycle.
Available Massage Options
• Single
• Wave
Wave
English
= Constant On
= On while cycling
65