Temperature Therapy Options - Jacob Delafon DTV E684-1CP Notice Technique

Temperature Therapy Options

Temperature Therapy Not Activated
Temperature Therapy Active
Path : Shower > Temperature > [Back Icon] Options > °F Therapy
NOTE : If the icon
function is not yet activated. Refer to the "Activate Temperature Therapy" section to turn on
this function.
This function, when activated, causes the water temperature to cycle from hot to cold to hot
or cold to hot to cold dependent on your chosen therapy.
NOTE : Temperatures can be customized as desired. For the explanation of the therapies the
default temperatures will be used.
Hot therapy will start with a water temperature of 101°F (38°C) for 90 seconds, decrease
to 96°F (36°C) for 45 seconds, decrease again to 86°F (30°C) for 30 seconds, then step the
temperature back up to 96°F (36°C) for 45 seconds before going back to 101°F (38°C). The
water temperature will continue to cycle until this function is turned off.
Cold Therapy Cold Therapy will start with a water temperature of 86°F (30°C) for 30 seconds,
increase to 96°F (36°C) for 45 seconds, increase again to 101°F (38°C) for 90 seconds, then
step the temperature back down to 96°F (36°C) for 45 seconds before going back to 86°F
(30°C). The water temperature will continue to cycle until this function is turned off.
• To use the temperature therapy function from the temperature screen, press the [Back
Icon], scroll to and select "°F Therapy," then scroll to and select either "Begin Hot" for heat
therapy, or "Begin Cold" for cold therapy.
56
is present following "°F Therapy" instead of an arrow, the massage
English
Refer to the "Activate
Temperature Therapy"
section. Hot Therapy
Cold Therapy