Getting Started
Change the crossover type
Press B SRC repeatedly to enter STANDBY.
1
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, see page 24.
CAUTION
Select a crossover type according to how the speakers are connected.
(Page 30, 31)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.
Radio
• "ST" indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select RADIO.
2
Press BAND repeatedly to select FM1/FM2/FM3/MW/LW.
Press S / T to search for a station.
3
You can store up to 18 stations for FM and 6 stations for MW/LW.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6).
7
ENGLISH