Velleman DVM99 Mode D'emploi page 2

Erratum to manual of DVM99 dated 04/05/2012 and before.
Section 6 – Operation. The table in this section should be as follows:
MIN The MIN function is not supported.
MAX The MAX function is not supported.
LOCK Press the IRT button [D] to enable LOCK-mode (continuous
measurement). Press the hold button [E] to exit LOCK-
mode.
°C/°F When °C indication is flashing, press the IRT button [D] to
switch to °F mode and vice versa.
ε
Press the up [E] and down [D] buttons to set the emissivity
(see §7).
V. 01 – 12/03/2013
DVM99
ENGLISH – erratum
2 ©Velleman nv