Settings & Adjustments; Led Display - Aerus PURE & CLEAN A1040A Mode D'emploi

SETTINGS & ADJUSTMENTS
The Aerus Pure & Clean can be turned on or off, and adjusted, using the control panel on the front of the unit.
NOTE: If you are operating your central heating and air conditioning fan or other ventilation system continuously, set the coverage up to the total
ventilated indoor area. Otherwise, set the coverage up to the size of the room.
POWER (stand by)
Turns the unit ON and OFF.
FAN UP/FAN DOWN
Adjusts the five speed fan.
A·PURE/A·PURE x2
Toggles the unit between A·PURE Mode (ActivePure® and Ionization) and A·PURE x2 Mode (ActivePure® Cells and Ionization).
REMINDER RESET
Clears the maintenance reminders after performing routine maintenance.

LED DISPLAY

The LED Screen is used to display all current settings (see page 5) as
well as any maintenance reminders.
If a maintenance reminder or a service reminder appears, the
backlight will brighten and constantly flash until the Reminder Reset
icon is pressed or the service problem is corrected.
6
Reminder Reset
Power ON/OFF
Fan Speed
(5 Levels)
Clean Filter
Assembly
Flicker: Replace ActivePure® Cell
Red Light: ActivePure® Cell Malfunction
Fan UP
x2
Fan DOWN A·PURE / A·PURE x2
Modes (A·PURE / A·PURE x2)
x2
Ion
Operation