Using V.a.c. Veraflo™ Dressing In Conjunction With Bandages, Garments - Acelity V.A.C.ULTA Mode D'emploi

USING V.A.C. VERAFLO™ DRESSING IN CONJUNCTION WITH
BANDAGES, GARMENTS OR OFF-LOADING DEVICES
Fig. 38
Layer 1
Fig. 44
1. Apply V.A.C. VeraFlo Cleanse™ Dressing and V.A.C.
in the previous sections.
2. Carefully cut a 3 cm hole in the V.A.C.
V.A.C. VeraT.R.A.C.™ Pad Application section (Fig. 38, Fig 39).
3. Cut V.A.C. Advanced Drape in half (Fig. 40).
®
4. Apply additional V.A.C.
(Fig. 41, Fig. 42). Ensure that the draped area will be larger than the foam bridge.
5. Cut an appropriately sized piece of V.A.C. VeraFlo™ Dressing for the bridge (Fig. 43 and
Fig. 44).
CAUTION: Bridge length should be as short as possible to ensure efficient fluid flow.
Fig. 39
3
cm
Fig. 42
Fig. 41
Fig. 45
2.5
cm
Fig. 47
Advanced Drape over intact skin where the bridge will be applied
®
Fig. 48
Advanced Drape to wound as described
®
Advanced Drape (not a slit) as described in the
®
29
Fig. 40
Fig. 43
Fig. 46
Off-loading
Boot