Declaration Of Conformity - Pattfield Ergo Tools PA-1700SH Traduction De La Notice Originale

protective gloves when grasping the
chisel or accessory. Accessories may be
hot after prolonged use.
d) Do not run the tool while carrying it at
your side. The spinning drill bit may be-
come entangled with clothing and injury
may result.
MACHINE SPECIFIC SAFETY WARNINGS
a) Only work with tools assembled cor-
rectly. Check the proper fit of the tool and
its accessories by pulling it.
b) Make sure that the area beneath the
working height is free. .
c) Check the hammer and its accessories
before every use for rust and damage.
Do not use the hammer, if it is damaged
or deformed. If you observe a damage,
contact your HORNBACH store.
d) Reduce dust pollution. While working,
particels occur which could cause can-
cer, allergic reactions, respiratory dis-
eases, birth defects or other reproduc-
tive harm. Examples: Lead in lead paint,
mineral dust in brick or concrete, asbestos,
metals, wood preservative like chromate or
wood dust from oak or beech. Always wear
hearing protection, protection glasses, pro-
tection gloves, dust mask and safety boots
while working with the hammer to avoid
injuries.
e) Vacuum or wash the safety equipment. Do
not blow, beat or brush off the dirt particles.
118 EN
ADDITIONAL SAFETY INSTRUCTIONS ON
RISKS DUE TO VIBRATION
a) The declared vibration data represents
the main applications of the tool, but
different uses of the tool or poor main-
tenance can result in different vibration
data. This may significantly increase the
vibration level over the total working period.
b) Additional safety measure shall be taken
to protect the user from effects of vibra-
tion. Maintain the tool and its accessories,
keep hands warm and organize work pat-
terns and periods.

Declaration of conformity

We declare, that the product
described in Technical Data:
1700 W caulking and demolition hammer
PA-1700SH, PA-1700SH CH
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
Outdoor Directive 2000/14/EC and
2005/88 EC
and in accordance to the following applicable
harmonized standards:
EN 60745-1:2009+A11:2010
EN 60745-2-6:2010
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Andreas Back
Head of Quality Management, environment
& CSR
Person authorised to compile the technical file
Bornheim, 15.08.2018
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
EN 119