EN Mounting instructions
Product description
EN
Figure :
Square service outlet for dry-care floor cover-
ings on screed and for system floors . Installation
housing with cord outlet
in the hinged cover
1
for cable routing . With eight premarked entry
2
openings
for installation pipes (M25) . The
4
frame
can be adjusted to the top edge of the
3
floor covering using four height-adjustment sup-
ports
. The minimum installation depth is
5
95 mm, the height adjustment range +20 mm .
With pre-wired double socket
and strain relief .
6
Up to two modular data sockets (keystones) or
multimedia modules can be installed using an
optionally-available mounting support . With
mouting cover
.
7
Accessory: Strain relief (item no . 7408 650)
21