Table des Matières
Publicité
Frequency Bands and Power
(a) Frequency bands 111–145 kHz.
(b) Maximum radio-frequency power transmitted in the frequency bands in which
the radio equipment operates: The maximum power for all bands is less than the
highest limit value specified in the related Harmonized Standard.
The frequency bands and transmitting power (radiated and/or conducted)
nominal limits applicable to this radio equipment are as follows: 33.63 dBμA/m at
3 m.
Accessories and Software Information
It is recommended that the following accessory be used: charging adapter
delivered with the device.
The product software version is 88.68.11.80. Software updates may be released
by the manufacturer to fix bugs or enhance functions after the product has been
released. All software versions released by the manufacturer have been verified
and are still compliant with the related rules.
All RF parameters (for example, frequency range and output power) are not
accessible to the user, and cannot be changed by the user.
For the most recent information about accessories and software, see the DoC at
http://consumer.huawei.com/certification.
FCC Statement
This device should be installed and operated with a minimum distance of 15cm
between the antenna and all persons. This device has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the device and receiver.
--Connect the device into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
5
Publicité
Table des Matières
