Checks And Maintenance - Nilox DOC E-BIKE X3 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Make sure cycling speed always permits stopping at any time and in any situation.
We recommend you maintain a suitable safety distance from other vehicles when cycling.
Do not perform stunts.
Do not get down from DOC E-BIKE X3 when it is in motion.
Periodically check the components before use.
Observe traffic rules, slow down in the rain or snow and take these into account to adjust the
safety distance accordingly.
In urban areas it is advisable to use the bike on even road surfaces.
Although it is impermeable, do not use DOC E-BIKE X3 to wade through rivers. Do not immerse
the part with the electric and electronic components in water.
Do not modify DOC E-BIKE X3 in any way; any modification will invalidate the manufacturer's
warranty
Only use the original battery charger supplied.
Check the efficiency of the brakes before use.
Carefully reading this manual is essential for its correct use and to reduce personal injuries.
MAKE SURE THE BATTERY IS FULLY CHARGED BEFORE USE.

CHECKS AND MAINTENANCE

To prolong the life and efficiency of your DOC E-BIKE X3, certain operations need to be performed on a
regular basis:
Regularly check the tyre pressure.
Check that the handlebar and saddle are always well secured.
Adjust the chain tension and lubricate it periodically.
Before each use always check the reliability of the braking system.
Check that the wheel bolts are tightened.
Check the condition of the tyres and replace them when worn.
Do not wash DOC E-BIKE X3 directly with jets of water, especially pressurised, since this could
damage the electrical components.
Clean dirty areas with a damp cloth and neutral detergent; then dry with care.
Treat the metal moving parts such as the chain with lubricating oil. TAKING CARE THAT NO
OIL DRIPS ONTO THE BRAKING PARTS. We recommend you have these operations performed
by qualified personnel.
Regularly check the tension of the chain, by releasing the quick-coupling clamp and holding
the wheel. Make sure that the wheel is perfectly in axis.
Frequently check the reliability of the brakes.
CORRECT USE AND MAINTENANCE OF THE BATTERY
The following covers different methods of recharging and maintaining the battery, as well as any problems
that may arise. For the safety of the consumer and to prolong the life and improve performance of the
battery, please observe the following:
The battery and the battery charger must be kept out of children's reach.
Use the maximum speed of the PAS only with the battery fully charged.
Only use the original battery charger; the use of a different battery charger could damage it
irreparably.
Do not disassemble or modify the battery and/or its charger.
Be extra careful when removing the battery from the DOC E-BIKE X3, dropping it could damage
it and make it unusable.
EN
9

Publicité

Table des Matières
loading

Table des Matières