Assembly Of The Sausage-Filling Cap - Springlane Frida Mode D'emploi

ASSEMBLY OF THE SAUSAGE-FILLING CAP

7
1. Hold the mincer's case (3) with the largest opening facing towards the top.
2. Put the screw (4) into the case.
1. Place the cap (8) and the sausage-filling cap (9) in front of the screw. Seize the
lock (7) until the sausage-filling cap is fixated.
2. Hold the assembled mincer with the opening facing to the top and the sausa-
ge-filling cap towards yourself. Connect it to the stand mixer's engine top via
turning. The large opening faces towards the top when assembled.
3. Put the funnel (2) onto the mincer.
14
9 8 4
2
3