Springlane Frida Mode D'emploi page 13

Note:
Fill the mincer with the darner (1) continuously through the funnel. Never use your
fingers or other tools.
USING THE MINCER:
1. Place the stand mixer onto an even, clean and dry work place.
2. Hold the mincer's case (3) with the largest opening facing towards the top.
3. Put the screw (4) into the case.
4. Put in the knife (5).
5. Insert a cap (6) onto the knife and make sure the two clips are inserted
correctly into the two holes in the mincer's case.
6. Seize the lock (7).
7. All parts are supposed to be fastened properly.
8. Hold the assembled mincer with the opening facing to the top and the cap
towards you. Connect it to the stand mixer's engine top via turning. The large
opening faces towards the top when assembled.
9. Put the funnel (2) onto the mincer.
13