Training And Qualifications - Rosenbauer RTE FX Instructions D'emploi

Safety

Training and qualifications

3.4 Training and qualifications
10 / 154
Operator errors caused by inadequate qualifications can cause serious ac-
cidents or jeopardise the success of the operation. Safe operations can be
assured only when operation and consistent maintenance of the product is
performed exclusively by specially trained personnel.
Only qualified training and continuous practice of the operating procedures
ensure safe use.
One-time instruction is not sufficient!
Personnel must exhibit physical and mental aptitude. Minors and persons
without qualified training may not operate the product.
The operator is responsible for defining responsibilities and supervision of
personnel as well as for adequate instruction and training according to ap-
plicable regulations.
Even during operation, make sure that persons without technical knowl-
edge never operate the product.
Modifications and conversions to the product and its accessories may be
performed only with written authorization from Rosenbauer and must be
performed by a manufacturer-authorised person.