Motorola HS820 Manuel page 10

CFJN1012C Manual HS820
Adjusting volume
To adjust volume, press either one of the bottom and top volume buttons repeatedly until you reach the
desired volume level.
Volume Orientation technology - To change the volume button orientation from left or right rear: with
the headset off, press the multifunction button and desired volume button to assign a "volume up" until
the LED flashes 2 times and the headset powers up.
Pairing your headset and phone
You must pair your headset and phone before you can make a call.
"Pairing" creates a link between devices equipped with Bluetooth wireless technology and allows the
phone to remember the headset's unique ID. Once your headset and phone are paired, your headset
automatically connects to your phone.
Pairing
With the headset and phone in close proximity:
Step 1: When the headset is off, press and hold the multifunction button until the headset indicator
turns on permanently.
Step 2: Perform a device discovery (or scan) from the phone. For details about device discovery
consult your phone's user guide.
Step 3: Select the Motorola HS820 in the list of discovered devices and confirm by following the on-screen
prompts.
Step 4: When requested by the phone, enter the passkey 0000 and confirm.
The device ID is now stored in the phone's memory. Pairing is successful when the headset indicator
flashes rapidly.
Paired link to additional devices
Your headset can store pairing information for up to eight different devices equipped with Bluetooth
wireless technology. Devices are stored in a "Paired Device List" in memory in chronological order.
When an attempt to pair to more than eight devices is made, the oldest paired device is removed from
the list.
Any of the eight paired devices can initiate a paired connection to the headset.
29/06/2004 15:09 Page 10
English
7