Trevi RC 80D2 DAB Manuel Utilisateur page 11

SET ALARM TIME AND ALARM MODE
1. Press the Alarm Button to select Alarm 1 or Alarm 2.
2. Press the Up/Down Button to toggle the Alarm 1 (Alarm 2) symbol on and off .
3. When the Alarm 1 (Alarm 2) symbol is on, press once the Select Button to enter
alarm setting mode.
4. You can adjust the alarm time, select Once, Daily, Weekdays or Weekends, Buzzer/
FM/DAB, Duration-15, 30, 45 or 60 Mins by pressing Up/Down Button and Select
Button under each selection.
5. Under each selection, press and hold the Menu Button for about 2 seconds (or
wait for about 5 seconds without pressing any button) will complete the alarm setting
mode.
6. When it reaches the alarm time, you can hear the Buzzer or radio. Press once the
Power Button to turn off the alarm sound.
RADIO OPERATION (FM / DAB)
When you first power up and turn on your unit, it begins an automatic scan for DAB stations.
A progress bar will show the progress of the scan and the number of stations found
will also be displayed. When scan is completed, your radio will select the first available
station and begin to play. Stations are listed in numerical and then alphabetical order by
default.
1. Press once the Power Button to set the unit to Radio mode.
2. Press the Mode Button to select FM or DAB mode.
3. Tune a station by pressing the Up/Down Button.
Pressing either Up/Down Button for more than 1 second to activate the
automatic tuning mode. The automatic tuner will scan up or down and lock onto the
next station. If the automatic tuning does not precisely tune into a radio station, press
the Up/Down Button to adjust the tuning.
4. Adjust the volume by pressing Volume Up/Down Button.
5. Press the Menu Button to check the information of the tuned radio station.
6. To turn off the radio, press once again the Power Button to set the unit to Standby
mode.
Note: The DAB radio station list is stored in the memory and so the next time you switch
your radio on, the station search will not start again.
STORES PRESET STATIONS
Up to 10 stations for DAB and 20 stations for FM can be stored in memory :
1. Tune to a desired station as described in previous section.
2. Press and hold the Preset Button for about 2 seconds then the Preset Station Number
will fl ash. Release the button.
3. Press once or more times the Up/Down Button to select your desired Preset
Station Number from P1 to P10 in DAB mode or P1 to P20 in FM mode.
4. Press once the Select Button then the Preset Station Number will stop fl ashing.
Now the station is stored in your desired Preset Station Number.