CABASSE STREAM 1 Notice D'installation page 24

e n g l i s h
BlUEtootH ConnECtIon to an
aPPlE CoMPUtER
1) BLUETOOTH MODE ACTIVATION
Connect the Stream 1 to mains to power it on. If Stream 1 is already
on, stop any running Bluetooth connection between Stream 1 and
any other item.
Activate the Bluetooth function of the computer: open the « apple »
menu and select « Systems Preferences ».
Select « Bluetooth » in the window for the « Systems Preferences ».
Select « On » and click on « Set Up New Device"
Select « Stream 1 » in the list of items and click on "Continue"
Connecting...
Connection completed. Stream 1 is now paired with your Mac
computer.
2) SELECTION OF THE AUDIO OUTPUT DEVICE
To enjoy the musics stored on you Mac with Stream 1, set up
Stream 1 as your audio output device in the "System Preferences"
menu.
Select « Sound » in the « Hardware » section.
Select "Stream 1 Stereo" in the « Output » tab. The line "Stream 1"
stands for the hands free set up to be used only with a smartphone.
Set the volume control on far right position.
Close the "Sound" window.
If the Stream 1 is on stand-by mode, it will take around 6 seconds to
start playing, the Bluetooth input being automatically selected. Use
the Stream remote control to adjust the sound level.
If Stream 1 is active and connected to another active source (wifi,
analog) use the Stream remote control and select the Bluetooth
input with the 8 key, then adjust the sound level.
24