Axis Q60 Serie Guide D'installation page 18

AXIS Q60 Series
The multi-connector cable is connected to the camera's multi-connector, see Hardware Overview
on page 10.
The wires are connected to the supplied media converter switch, see Media Converter Switch
on page 14.
The cable provides the following signals:
• DC power to camera
• Network (Ethernet 10/100Base-T)
• Input/Output (I/O)
Multi-connector cable overview
1
Power wire (red)
2
Digital I/O wire (blue)
3
Ethernet wire (green/white)
4
Ethernet wire (green)
5
Ethernet wire (orange/white)
6
Ethernet wire (orange)
7
Digital I/O wire (yellow)
8
Ground wire (black)
9
Power wire (red)
10 Ethernet wire foil shield (2x)
11 Outer foil shield
12 Braided shield coil
1 8
2 7
9
3 6
4 5
12 11
10
18
1
2
3
4
5
6
7
8
9