Tectro TP 1020 Manuel D'utilisation page 70

This air conditioner is provided with foam strips. If you guide the exhaust hose
through the window, a gap is created which can be closed with help of the foam
strips. Guide the exhaust hose through the foam strip.
G
C
OPERATION
1 2 3
1. Auto mode indicator
2. Cooling mode indicator
3. Air circulation mode indicator
4. Mode button
5. Timer operation indicator
6. Timer button
7. Full water indicator
8. Temperature up button
9. Display
10. Remote control receiver
11. On / Off button
12. High fan speed indicator
13. Low fan speed indicator
14. Fan speed button
15. Sleep indicator
16. Sleep button
17. Compressor operation indicator
4
18. Temperature down button
70
Ensure that the window air outlet L has a free flow outside. Close the
window or door as much as possible to prevent outside air from entering the
room.
IMPORTANT
The flexible exhaust hose should be less than 1m during operation,
which provides the best performance. This length has been designed
especially according to the specifications of the air conditioner. Do not
use an extension or exchange for a different hose as that may lead to
malfunctioning. The exhaust air must flow freely, any blockage can lead
to overheating of the air conditioner. Take care to prevent any bow or
bend in the exhaust hose.
4 4
5
6
7
8
9

J
Q
R
K
L M
N
