Assembling The Instrument; Assembling The Push Handle; Assembling The Display Housing - Seca 959 Mode D'emploi

5.3 Assembling the instrument

Assembling the push
Assembling the display
handle
1. Put the push handle on the pins of the lower frame.
2. Screw the handle to the lower frame (2 x hexagon
screw M6x16 with washer 6.4 mm).
housing
1. Insert the fastening bolts of the display housing
through the holes in the handle.
2. Screw the display housing to the handle (2 x
hexagon nut M4, self-locking).
2.
1.
2.
Before you get started ... • 61
English
2.
1.