Check The Installation - Vetus SENSORD Manuel D'utilisation Et Instructions D'installation

the main instrument or to the network of sen-
sors, see Chapters 6 and 7.
Use a patch cable*) for this.
*) Patch cable: A Cat.5 UTP network cable
with an RJ45 plug at both ends. Do not
use a 'crossed' cable!
The following lengths of patch cable can be
supplied.
- 3 metres:
Art. code: SENSOR03
- 5 metres:
Art. code: SENSOR05
- 10 metres:
Art. code: SENSOR10
These cables are supplied inclusive with (1)
coupling block.
Ultrasonic tank management system

3.2.6 Check the installation

After making the connections check that all
sensors function.
• Switch on the instrument, see 2.1 'Switch-
ing on' .
The volume in the 2 tanks will now be dis-
played on the instrument.
• Press the key 1x.
The name of the tank should now be dis-
played for each tank connected.
Configuration menu
Tank
Vetus
Display settings
Exit
• Return to the normal display screen as fol-
lows:
Press successively:
, and
• Now set the required language, see 'Set-
ting the language' .
ENGLISH
Vetus
.
37
090430.01