Vetus SENSORD Manuel D'utilisation Et Instructions D'installation page 42

Example 1
If the drinking water tank is a Vetus 120 litres
tank then the settings for tank volume and
tank height will now have been changed ac-
cordingly.
The settings for tank volume and tank height
can now not be changed.
The other settings, e.g. 20% tot. height etc, do
not apply here and can therefore also not be
changed.
Tank calibration
Tank type
Tank volume
Tank depth
20% tot. depth
40% tot. depth
60% tot. depth
80% tot. depth
Exit
• Return to the menu 'Tank settings' by us-
ing the /
'Exit' and pressing
• Return to the 'Configuration menu' by us-
ing the /
'Exit' and pressing
• Connect the next sensor; the name of the
sensor that has just been connected (Ve-
tus) will be displayed after a brief interval.
Configuration menu
Tank
Drinking water
Display settings
Exit
42
090430.01
Vetus 120 l
120.0 l
29.0 cm
n.a.
n.a.
n.a.
n.a.
keys to navigate to
.
keys to navigate to
.
Vetus
Select the sensor that has just been con-
nected using the
press 2x. The keyboard and the
name of the tank will then be displayed
again.
Repeat steps B and C for each following sen-
sor.
Ultrasonic tank management system
/ keys and