* Important: if a remote control button does not work when pressed,
Setting the VOLUME ADJUST
Some DVDs are recorded in lower than average volume levels.
For these DVDs, this DECK can be set so that the average volume
is increased.
Press VOL.ADJ repeatedly to change "ON" ↔ ↔ ↔ ↔ ↔ "OFF."
• "ON" or "OFF" lights up on Multi Function Display (about 3 seconds) when
press VOL.ADJ.
Some DVD
[Volume level is low]
• "ON" is set ..... When a DVD is played back, the average volume is increased.
• "OFF" is set .... The volume level recorded on the disc is played back just as it is.
Notes
• This feature is available only for Dolby Digital sound tracks.
• When audio equipment is connected, setting the Sound Output level to "OFF" is recommended.
• If the sound becomes abnormal while playing a disc, set the Sound Output level to "OFF."
PV-D4743S-K P36-56 (030223) RAM.p65
press the DVD button on the remote and try the button again.
VOLUME ADJUST "OFF"
Volume is the original level.
41
VOLUME ADJUST "ON"
Volume level is increased
when played back.
41
2003/03/14, 10:34