Multi-Brand Control Feature - Panasonic DoubleFeature OmniVision VHS PV-D4743S-K Manuel D'utilisation

Multi-Brand Control Feature

Multi-Brand Control Setup
The Remote Control can be set to control some TV functions.
1
Find your TV Brand Code Number on the
following page.
2
Set up for TV control,
➛ ➛ ➛ ➛ ➛ hold down TV button,
➛ ➛ ➛ ➛ ➛ enter code with NUMBER keys.
• If code number is 100 or greater,
➛ e.g., press 1 - 0 - 2 for 102.
3
Confirm code entry,
➛ press POWER to turn selected unit on or off.
• See table below for controllable functions in each mode.
Notes
• Repeat setup after remote battery replacement.
• Remote will not control every TV made by the
manufacturer listed. If you get no response, your particular
unit cannot be controlled. There are NO additional codes
for the products listed. If your product is not listed, then the
remote is not compatible with that product.
Using Multi-Brand Control
After remote is set up, you can select VCR, DVD, or TV for the
desired function.
Press VCR, DVD , or TV on the remote.
(Table below shows available remote buttons for each mode.)
Unit
DVD/VCR
Mode
DVD/VCR
TV
EJECT/ OPEN/CLOSE
DISPLAY , PLAY , STOP ,
FF/SLOW+ , REW/SLOW- ,
VCR/TV, PAUSE /STILL , SKIP ,
AUDIO , CM/ZERO,
TAPE POSITION,
COUNTER RESET, SPEED,
REC
*
Bold: VCR Function
Italic: DVD Function
Notes
• Not all functions listed may be controllable.
• In TV mode, it may be necessary to press ENTER after pressing NUMBER keys
for channel selection.
28
PV-D4743S-K P26-35 (030223) RAM.p65
All
* POWER, INPUT,
,
NUMBER keys, ENTER,
CH / , VOL
Bold Italic: VCR and DVD Functions
Normal: TV
28
TV
+
-
VOL /
+
-
/
2003/03/14, 10:34
POWER
TV
NUMBER
keys
DVD
VCR
ENTER