Unpacking &
Installing
Unpack your oven and place it on a flat level
surface.
GLASS TRAY
ROTATING RING
By following the basic steps on these two pages you will be able to quickly check that your oven is operating
correctly. Please pay particular attention to the guidance on where to install your oven. When unpacking your
oven make sure you remove all accessories and packing. Check to make sure that your oven has not been
damaged during delivery.
least 20cm of space on the top and 10cm at the rear for proper
ventilation. The front of the oven should be at least 8cm from the
edge of the surface to prevent tipping.
An exhaust outlet is located on top or side of the oven. Blocking
the outlet can damage the oven.
THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL CATERING
PURPOSES
4
Place the oven in the level location of your choice
with more than 85cm height but make sure there is at