Hyundai HY-RBC1562-001 Guide D'utilisation page 27

4.3 Meat Mincer accessory
Meat mincer can mince meat, chicken or fish. Use this accessory to mince a large quantity of food quickly
to obtain perfect home-made chopped steaks. Do not hesitate to add spices. You can also mince
vegetables (such us baked potato) to prepare puree.
M1 Pusher
M2 Tray
M3 Screw Housing
M4 Screw
M5 Mincing Lock
M6 Blade
M7 Disc ( coarse,
medium and fine
hole size )
How to assemble and use meat mincer
1) To install the meat mincer accessories, first install the meat mincer blade M6 on the head of the meat
mincer screw M4, put on the required meat mincer plate M7 (coarse hole, medium hole or fine hole), pay
attention to align the groove between the meat mincer blade M6 and the meat mincer housing M3, and
tighten the locking nut M5 on the meat mincer housing M3. (PG1)
2) Disassemble the front cover (PG2).
3) Press the eject button at the front of the machine, hold the meat mincer M3, connect it to the
transmission part of the front cover, and rotate it counterclockwise to the locking position. (PG3)
4) Align the discharge port of tray M2 with the feed port of meat mincer M3 and install it in place (PG4)
5) Place a recipient at the outlet of the meat grinder. Clean the pork and cut it into strips. The width
should not exceed the feed inlet of the tray M2.
6) Insert the power cord plug into the socket, then set the speed knob to speed 3, put the meat on the
tray M2 and put it into its feeding port. Please use the pusher M1 to slowly press the meat into the
feeding port of the meat grinder. Do not put your fingers into the meat grinder M3.
7) After using, switch the speed knob to setting 0 and pull off the plug.
9