Hyundai HY-RBC1562-001 Guide D'utilisation page 26

Caution
Before using the blender, do not plug it. Please make sure the blender has been correctly installed on
1)
and the lid is securely on before operating.Unplug when it's done, and remove the blender cups from
the device. Please don't add food above 80°C to the blender jar.
Maximum liqid is no more than 1.5L.
2)
Secure the lid on the cup.
3)
Don't remove the blend cup or lid during the operation.
4)
Run the blender no more than 3 minutes by turning the speed knob (3) on Pulse speed.
5)
How to assemble the blender jar
1）Remove the rear cover (10) PG1.
2）Put lid B2 on the blender cup B1(follow by PG2).
3）Put B3 in B2, and screw on (follow by PG3).
4）When all are done, clockwise and screw the jar on the base (follow by PG4).
Attention
Add ingredients by removing the lock cylinder during operation. Please pay close attention during
operating. Once it's done, unplug it. And wash the jar after use.
Disassembly procedures after use
1) Anti-clockwise to 0 level, and unplug.
2) Unscrew the jar and place it on table.
3) Take B2 out by hand.
4) Hold the glass handle with one hand, hold the glass body with the other hand, and slowly tilt to pour
out the liquid.
Tips
Remove the seed core and hard skin of the fruit, cut it into a mixture, put it in a cup, and then put water.
The maximum amount of food is 600 grams and the water is 900 grams. Do not exceed the maximum
scale. Put the lid on and screw the jar on blender. Plug in and set the speed controling at level 4 ~ 6.
Stop it after operating for 3mins, in order to keep the good performance to the machine, the total
operation time shall not exceed 15-min.
8